$0.00
0
0
Subtotal: $0.00
No products in the cart.

LASERHYDE™

Premium Signature LEATHERETTE

Amber Buckskin Thick Leatherette Sheet

Amber Buckskin Thick Leatherette Sheet 12″ x 18″

(0 customer reviews)
Our Esentl LaserHyde™ Amber Buckskin Thick Leatherette, engravable sheet stock with its aged simulated leather saddle like finish, stressed look, and slight sheen, will be sure to make any patch look classic and luxurious.
Adhesive Backing Options:

Availability: 64 in stock

12x18
Facebook Youtube Instagram

quantity breaks per style - click to enlarge

Amber Buckskin Thick Leatherette Sheet 12″x18″ LaserHyde™ with Adhesive

Our Amber Buckskin Thick Leatherette Sheet 12″x18″ LaserHyde™ with Adhesive, with its smooth feel, aged finish, and luxurious distressed look, will be sure to make any hat patch feel like real high end buckskin leather. Above all, our LaserHyde™ signature leatherette has an amazing thickest of 1.95mm, before adding our adhesive, and 2mm after adding our LaserHyde™ adhesive. With using our exclusive premium products, your hat patch projects will be sure to become higher quality and have a more premium look and feel.

LASERHYDE™ FEATURES

  • Perfect material for simulating thicker leather style hat patches
  • Laser engravable premium thick leatherette sheet material
  • Faux leather is a laser safe product
  • Engravable Color: Black
  • Not prone to fading from sunlight
  • Does not need to be sealed
  • 1.93mm thickness that simulates a 5-6 ounce leather
  • 3 layer premium signature leatherette product
  • Modified adhesive in between layers
  • Easy to clean product – (Recommendations: LA Awesome Cleaner)
  • LaserHyde™ Leatherette is a water friendly material
  • Animal cruelty free and Vegan friendly
  • Cost affective material when compared to to any other real leather product

ALL ABOUT LASERHYDE™ ADHESIVE

LaserHyde™ adhesive, is our proven and tested water resistant thermoplastic hot melt 2 sided film adhesive. A huge benefit of our adhesive is that it features excellent adhesion to most soft and hard textile products. Additionally, when using LaserHyde™ signature adhesive, on apparel clothing, beanies, headwear, and outerwear, you can feel confident knowing that it is dry cleaning safe and can handle wash temperatures up to 50℃, (125°F) and features a very low melting point.

LaserHyde™ Adhesive is OEKO-TEX Standard 100 Certified

 

ADD OUR SUPREME COLOR DTF TRANSFER TO ANY BLANK PATCH OR LASERHYDE SIGNATURE LEATHERETTE SHEET MATERIAL

CLICK HERE: DTF Transfers

 

SOCIAL MEDIA

Follow us on our YouTube channel for reviews on equipment, as well, how to tutorials and up to date release videos on our products.

CLICK HERE: YouTube

Join our Facebook group for the latest product release dates, see images or other work, and collaborate with other decorators.

CLICK HERE: Facebook

 

 

Weight 0.41 lbs
Color

Satin Amber
Size

12×18
BrandLaserHyde
Price breaks qtys1, 10, 25, 50, 100
Adhesive Backing OptionsBond adhesive to leatherette, Add but don't bond the adhesive

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information:

stop scorching your hats!!

Silicone Hat Protection Kit
CLICK TO ORDER the hat mat!

heat press instructions

Upper platen heat 290F

Lower platen heat 300F

“Make sure your heating element doesn’t have any  heating inaccuracies.”

All heat presses may vary so dial in your settings beforehand for best results.

Pre press your hat for 7 seconds to eliminate any moisture and to loosen up the material, Make sure to mold the hat shape to the platen, you should have no bubbles between the hat and platen it should feel flat to the platen surface.

Peel the paper backing off patch and place the patch on the hat. Some patches may or may not come with a paper backing based on the adhesive style. The lower heat and pre press should help this patch  stay in place slightly. Hold the patch down to melt adhesive a bit, then, Press patch for 25 seconds …. If you are using the Esentl Hat Mat silicone pad which is highly recommended, so you don’t scorch your hats, double the dwell time to 50 seconds, or whatever time works best for your machine setup. Always preheat  your silicone pad first for best results. 

All Patches and finished products are Hand Wash Only

You can use a light spraying of LA Awesome cleaner to clean any residue on your leatherette patches

  • 1.80mm with no adhesive
  • 1.93mm with GripTec adhesive

For all other hat presses here are some jumping off point setting you can use. As always practice on your machine to dial in your settings as they will vary from machine to machine

Time:
50-60 seconds w/ pad
Temperature:
340-350F
Pressure:
Medium
Cover Pad:
Esentl Hat mat Silicone Pad
 
Instructions:
Pre-heat your lower platen for 50-60 seconds. Add your hat and pre-heat for 20 seconds (using your silicone pad, prevents scorching and or burn marks). Make sure to mold the hat shape to the platen, you should have no gaps between the hat and the platen, it should be flat to the platen surface. Add patch and Cover with The Hat Mat Silicone flex pad and press.

Time

25 seconds normal dwell and 40-50 Seconds with the hat mat silicone pad

360 IQ Hat Press Temps

Upper 290F / Lower 300F

Pressure

Medium 6 / with silicone pad use a 7

Hat Protection

Recommended - The Hat Mat Silicone Pad
click image for product info

important tips

  • Always use a silicone pad for best results. we do not recommend any foam pads, as the pressure is not as good using those. for post ( preheat ) press use only a silicone pad as well (recommended), use our see our silicone hat mat for best results 
  • Always Check your patches before hat placement. 
  • Always check your upper heat press platen with a laser temperature gun to ensure accurate temps, before applying GripTec adhesive to your leatherette sheets
  • Store your patches or leatherette sheets in a cool dry place.
  • Lint roll your hats prior to patch placement.
  • keep your adhesive backing free of dust, use a water based wipe to clean any dust off
  • All our tests are done using a Stahls Hotronix 360 IQ Hat press, your settings may vary for any other style leatherette and adhesive or hat press. For Patches upper and lower heat is recommended, which is why we use the 360 IQ.
  • Always order a few extra sheets of leatherette, to dial in your laser engraving and cut settings

Check our Other esentl products

Small Patch Alignment Guide Tool #2
Silicone Hat Protection Kit
Hat Patch Alignment Tool Round 3" patch
Round Patch Alignment Guide 2.5"
Patch Alignment Guide Weights
Oval Patch Alignment Guide Tool
Large Patch Alignment Guide #1
Hexagon Patch Alignment Guide
Hat Patch Alignment Guides Set

JOIN THE ESENTL CREW

Be the first to know when some rad stuff is released!

INFORMATION

FOLLOW US

Facebook-f Instagram Youtube

2024 © ALL RIGHTS RESERVED

* Site Design by Esentl * POWERED BY WEB2INK *

Shopping Cart
Scroll to Top
preloader